Axial duct fans, medium pressure. Equipped on both sides with flanges for mounting them in general ventilation – duct systems. Provide high efficiencies at higher pressures than the standard “K” series. Suitable for ventilation of industrial, commercial and large premises.
Średnica [mm]:
400
0
500
1000
1500
2000
Wydajność [m3/h]:
3000
30000
60000
90000
120000
100000
Ciśnienie [Pa]:
1990
Axial fans designed for free air discharge over long distances. Equipped with inlet cone and safety net on the inlet, outlet cone, feet fixed to the body. Suitable for outdoor use. Weatherproof.
630
800
15000
40000
600
Axial duct fans. Standard low-pressure fans popular in most duct ventilation systems. Planetfan produces the largest range of duct fans manufactured in Poland in terms of available diameters.
315
237000
900
Wall-mounted fans for mounting on the walls of industrial and large-volume rooms. They transport air in low resistance installations. Often used to evacuate large quantities of warm air accumulated in summer under the ceilings of buildings and halls. Normally made for indoor installation as exhaust.
710
3900
24400
550
Axial fans for localised ventilation or stationary cooling. Built on a mobile frame with adjustable air discharge angle. Industrial design, for operation in production plants where workstations require continuous or periodic supply of fresh air.
33350
320
Axial fans for localised ventilation or stationary cooling. Equipped as standard with a frequency converter for infinitely variable adjustment of the fan speed and thus the fan capacity. Built on a mobile frame with adjustable air discharge angle.
Explosion-proof axial fans. Designed for operation in installations where a potentially explosive atmosphere exists (gas hazard), as per standard PN-EN 13463-1:2003 and directive 94/9/EC (ATEX).
1250
53600
670
High-temperature axial fans. Used in installations where the temperature of the flowing air can reach up to +105°C. Equipped with a special motor and impeller. Designed for continuous operation at high temperatures.
1200
43900
510
Axial fans designed for continuous operation at a maximum temperature of +135°C. A safe, proven and reliable design for high temperature systems. Every design element of the Type 135HT fan differs from the standard.
6500
33770
575
Axial fan, Air mixer. Mounted horizontally, under the ceiling, it supports ‘S’ type fans in ductless ventilation projects. Also used to induce movement in areas of ‘standing’ air. Helps remove localised excess moisture or heat. In its vertical position, it proves useful in winter for temperature compensation in high halls, forcing warm air from below the ceiling into the lower parts of the hall.
4000
14430
Roof ventilators – axial. Characterised by very high efficiencies in the low pressure range. Designed for industrial use. Resistant to atmospheric conditions. Optionally, they can be made in a supply version.
280
1100
56000
240
In this section you will find components for industrial ventilation systems. In addition to the standards, it is possible to produce components with dimensions and shapes according to customer requirements.
Axial fan impellers. If the customer knows the required flow parameters, we will help to select a suitable impeller. If the parameters are unknown, we will use our experience and try to suggest the best product.
250
2150
Axial fans, reversible (bi-directional), for continuous operation in high temperatures, up to + 105°C and high humidity. Specifically designed for use in drying chambers, especially in wood dryers and other drying processes where alternating bi-directional fan operation is required.
Equipped with modern cup-shaped blades to ensure the same flows in both directions.
8000
81300
300
Axial fans, reversible (bi-directional), for continuous operation in high temperatures, i.e. up to + 105°C and high humidity. Equipped with flanges of larger external diameters and larger pitch diameters of the connection openings in comparison with “KSU” type fans. Equipped with modern cup-shaped blades ensuring the same flow in both directions.
Axial, reversible (bi-directional) fans designed to pump larger air volumes than the KSU or KSBF series. They are produced as standard in diameters of Ø1000mm, Ø1250 and Ø1400mm. With the possibility of producing a maximum diameter of: Ø2150mm.
1629
25000
184000
780
Axial fans designed for air coolers and heat exchangers with closed-loop media. They are characterised by high efficiencies and quiet operation. Air flow: impeller – motor. Standard operating temperatures are -20 to +55°C. Resistant to atmospheric conditions.
22000
350
Axial fans with impellers fitted with hubs that allow the blade angle to be changed smoothly during fan operation. The impellers are additionally equipped with special low-noise blades, which is a definite advantage in an open discharge system. They generate a lower noise level. By changing the blade angle, the fan performance is adjusted. Weather-resistant.
20000
52000
Axial fans with impellers fitted with hubs, allowing the blade angle to be changed during operation. Impellers fitted with standard blades. Capacity adjustable by changing the blade angle. Optionally available in high temperature versions up to +85°C. Weather resistant.
50400
430
Axial fans designed for use in tunnelling and mine workings. They are ideal for ventilation as well as working with coolers. They generate low noise levels. They convey large air masses over long distances while consuming low amounts of energy. Available with motors with supply voltages of: 500V or 1000V and for an operating frequency of 50 or 60Hz. Available with accessories such as a noise damper, inlet confuser, guard net or support sled. It is possible to assemble the fans for serial operation (double fan).
1520
Medium-pressure axial fans designed for the drying process in installations where high dust levels and larger elements of solids contained in the flowing air can damage the motor. The fan bodies, are equipped with a chamber that effectively isolates the motor from the air stream.
The shaped impeller blades, made of aluminium, generate higher pressures and are more resistant to operation in adverse conditions.
They are used in modern grain dryers.
1400
Axial, high-temperature, medium-pressure fans designed for the high-temperature drying process in installations where high dust and larger elements of solids contained in the flowing air can damage the motor. The fan bodies, hot-dip galvanised, are fitted with a chamber that effectively isolates the motor from the air stream.
They are ideally suited for use in modern grain dryers where emphasis is placed on high drying parameters with a recuperation process.
Designed for continuous operation at high temperatures, i.e. up to + 105°C.
Axial medium-pressure fans designed for air handling in ventilation systems for ships and offshore units. The design of the impeller together with the rear guide vane ensures the pumping of large volumes of air in small duct sections. 50Hz or 60Hz motors can be used.
86400
1950
Radial low-pressure fans. Designed and engineered for high capacity pumping. Equipped with impellers with backward curved blades, which results in very high efficiencies. They have large inlet diameters in relation to the fan’s overall dimensions.
78000
6300
Medium-pressure radial fans with high capacities. Equipped with impellers that guarantee flows over a wide operating field. They convey large volumes of air at pressures higher than the “WPL” series. Also suitable for filtration and dedusting processes.
200
44000
14800
Radial fans with high pressures and lower capacities. Widely used where pressure is required, i.e. the installation due to the nature of the process creates high resistance.
850
11500
10150
Radial transport fans. Excellent for use in the wood, paper, textile and food industries. Also used in industrial process dust extraction systems and for pneumatic conveying. The open design impeller with forward curved blades generates higher pressures and prevents dust accumulation on the surface.
Also proven in installations where wet dust is conveyed.
140
225
7500
700
3600
Radial fans for air circulation in industrial installations. Used in ovens, dryers and other equipment where air circulation in closed chambers is required.
Can be manufactured in a high-temperature version up to +250°C.
70000
5000
Type PRM fans are portable radial fans dedicated to grain silos and floor dryers. They are characterised by a light and at the same time rigid construction. Resistant to atmospheric conditions. The welded, robust impellers are perfectly balanced, thus guaranteeing long and trouble-free operation of the motors without damaging the bearings. The fans are fitted with large wheels for easy movement over uneven surfaces. The circular discharge nozzle allows for easy connection to the installation. Often used universally in other industries besides agriculture.
2800
13800
3050
en
versions of website:
Categories:
Aktualności
22.10.2024r
Czytaj dalej
12.10.2023r
03.06.2023r
Już teraz dobierz idealnie dopasowany wentylator do Twojej instalacji!Kliknij poniżej, aby rozpocząć.
Perfect match, now accessible!Click below to get started.
